Posts Tagged ‘magne-clips’
For some time we have been considering various ways to clip our winding sticks together for storage purposes. Some traditional designs use a peg-in-hole method where one stick has two pegs protruding out of it and, you guessed it, the other stick has matching holes. Fit the pegs to the holes and the sticks hold each other reasonably well. We weren’t crazy about this design for two reasons: it’s not very attractive (in our opinion) and as the pegs and/or holes wear, their hold becomes less effective. We also considered some classy leather straps or end caps, but the added cost was a deterrent, as was the bulk it would add to an otherwise narrow set of sticks that would typically to be stored in a tool chest or on a shelf.
In the end, we designed our own method of holding the sticks together using rare earth magnets. Each stick gets a pair of magnets set just below the woods surface. The back of the hole is filled with a matching face-grain plug that typically goes unnoticed (unless you’re looking for it of course). The end result is a pair of winding sticks that looks as clean and beautiful as our standard pair, but put the faces together and they hold each other with just the right amount of force. (check out a brief video here)